Engine rebuilding and other machining operations including:

1) Cleaning and magnafluxing cylinder heads and blocks (including: hot-tank cleaning, jet cleaning (giant dishwasher) and glass bead cleaning of all types of metal parts).

2) Cylinder head resurfacing (aluminum and cast iron).

3) Cylinder head rebuilding: gas, diesel and L.P.G. (including: valve grinding, 3 angle seat cutting, custom porting and polishing, pressure testing, valve guide installation, valve seat insert installation, combustion chamber c.c.-ing, injector tube installation, and more...

4) Engine boring (from 1.5" to 8" diameter, including performance stress-plate boring, cylinder liner power honing, Detroit Diesel oversize liner fitting, cylinder sleeve installation, and counter bore cutting and sleeving).

5) Sonic testing to check cylinder walls and heads for thickness.

6) Connecting rod rebuilding (resizing big ends, aligning, magnafluxing, pin-bushing installation and center to center pin boring).

7) Crankshaft grinding, polishing and straightening, (from single cylinder to 78" long V-16 crankshafts).

8) Crankshaft micro welding (up to 84" in length).

9) Cylinder block align boring and align honing (1.25" to 5.5: including cap repairs and fitting and bearing saddle sleeving).

10) Block resurfacing and parallel decking

11) Camshaft grinding (automotive, diesel, and industrial, also lobe buildup repairs).

12) Magnafluxing to 100" length (all engine components, as well as industrial shafts, gears and steering parts).

13) Flywheel grinding (up to 24" diameter flat and stepped flywheels, pilot bearing boring sleeving, spot facing bolt holes).

14) Flywheel lightening.

15) Flywheel balancing.

16) Driveshaft balancing.

17) Engine balancing.

18) Engine blueprinting.

19) Helicoil, E-Z Lock, and Wurth thread repairs (as required).

20) Driveshaft repairs (including: balancing, retubing and straightening, as well as custom built driveshafts)

21) METCO ® spray-weld process (for building up and refinishing of shafts, seal surfaces and housings)

22) Cast iron welding (using actual cast iron) to salvage and /or repair exhaust manifolds and other castings.

23) MIG and TIG welding, including aluminum.

24) King-pin bushing installation and honing.

25) Front axle eye sleeving.

26) Custom lathe work and 40 ton press service available.

Any questions? Please call us in Nanaimo B.C. at (250) 758-4671 or elsewhere in Western Canada at 1-800-982-3350. Monday-Friday 8:00AM-5:00PM.

® patented process under license to Thompson Machine Ltd.